Each and every WiFi device in your home connects to your WiFi router, and if you are like many other people today, it just takes only a few hours without the WiFi to leave you feeling some anxiety at being disconnected. Get your network connections up and running by installing a new WiFi router, using this simple solution guide with steps.
While this basic general process should help you get any new WiFi router online, it is completely worth noting that each model will be a bit different. Many new models have a single setup process that skips or combines some of these steps, or which lets you manage your setup completely through a mobile device app. When in doubt, follow the directions that came with the wireless router. But if you want a general walk-through of setting up your home wireless network, these steps should get you completely connected. If you have any issue related to Netgear Router Setup then chat with us freely and resolve your problem.
- Check Your Internet Connection
If you are connecting your wireless router to an existing modem or ISP gateway, then you should probably already have a decent idea of whether or not your internet is working fine or not, but it is always worth checking. A bad connection can make for a frustrating and a longer attempt at wireless router installation when there may be nothing wrong with the wireless router itself.
If you are installing your WiFi router as part of moving into a new house or apartment, it is all the more important to ensure that you have an active internet connection, since you are likely to be setting up your WiFi router alongside a newly installed or activated service of the internet.
To check the status of the internet, simply connect to your modem or the ISP gateway using an Ethernet cable, and plug it directly into your desktop or laptop. If your personal computer is getting an internet connection, you are in a good shape to set up the wireless router.
Also, some ISP gateways offer combined modem and WiFi router functions. In this case, you will want to ensure that the WiFi modem/router combo is set to bridge mode. This should be fully explained in whatever instructions came with the gateway device.
- Place the Wireless Router
As you unpack the wireless router, pay attention to any of the documentation which is included. Keep an eye out specifically for any preset stickers or paper slips that may include vital setup information, like the address for the wireless router’s web interface, or the default username and the password.
If the network antennas are separate from the main WiFi router unit, you will want to install them. This is generally done by screwing them on to the connectors on the back or sides of the wireless router. In other cases, the WiFi router’s antennas will be built in, and just only need to be positioned and extended.
Once it is assembled and unpacked, you will then need to find a place to install the WiFi router. The position of the router will be in a central location, rather than at one end of the house. Since the routers broadcast in all the directions, you will want to put it roughly in the middle of your house to get the best coverage and signal connectivity strength.
A higher the position such as upon a shelf is preferred since the radio waves move out and down as they propagate through your house. You will also want to avoid the potential interference from several metal objects, brick or concrete walls. And stay away from the microwave, as it puts out the same frequencies that your wireless network signal uses.
We will provide you complete Support for Netgear router setup as we have technical experts in our team who can resolve your issues on the spot whether it is regarding the Netgear router setup or the Netgear router login. Our team of experts will be accessible at all times of the day and night so that you will not face any problem regarding the Netgear WiFi routers. You can get the help even in the odd hours of the day and night.